nobizlikedoughbiz

Whole Wheat Sourdough Discard Bread

For this Whole Wheat Sourdough Discard Bread I used 60% of T55 flour and 40% of whole wheat flour. T55 is a French flour, but no worries if you cannot find this flour in your grocery store, use regular bread flour instead. The protein content of your bread flour could be less (T55 has 14%), so you might need to adapt the amount of water a little bit. But it should work well. 

The way this sourdough bread turned out, makes me very happy. After baking quite some sourdough bread now, I’m still excited and can’t wait to lift the lid of my dutch oven to see how the crust has developed. The best moment for me, because in this moment I can see how well I have worked within the whole process. Every bread is unique and I’m not scared anymore to try different scorings to see what it does with the final result of the bread. I really love this.

When I cut the bread in half an see how the crumb looks like, that’s also exciting for me and finally, of course, the taste. The most important thing, because in the end it’s all about taste.

Tools & Equipment

Recipe Tips

Discard Starter: The flavor of your discard starter can be stronger or weaker depending on the time you have kept it in the fridge. If you think your starter may be too sour, use less. I usually use 20% discard starter based on the amount of flour, but you can reduce the amount to 10%. Keep in mind, though, that the bread won’t taste as sour as the starter smells. 

T55 Flour: This flour is a French flour. You should be able to buy it online, if you want use this flour. It has a protein content of 14%. If you do not have this flour handy you and can swap it for any other bread flour.

Room Temperature: For a good dough development, the preferred temperature is 25-27°C/77-80°F. If your room temperature is lower, you need to plan more time for bulk fermentation, mix the dough with warmer water or increase the temperature to speed up fermentation. For this, you can place the container with the dough in a turned-off oven with the control light on.

Bulk Fermentation: Your dough is well developed when it separates easily from the sides of the bowl when turned, the volume has increased by 20-30% and you can see some air bubbles on the sides of the dough. If your dough does not show these signs yet, increase the proofing time. Time is only an indicator, pay more attention to the dough itself to determine if the bulk fermentation is done.

Ingredients for Whole Wheat Sourdough Discard Bread

whole wheat sourdough discard bread

Directions How to Make Whole Wheat Sourdough Discard Bread

Autolyse

Pour 350g of cold water into a large mixing bowl, add the discard starter and mix a little. Add T55 flour and whole wheat flour and mix with a silicone spatula first and then with your hands until no bits of dry flour are left. Let the mixture sit for 25-30 minutes.

Add salt and the rest of the water to the bowl and knead for 3-4 minutes. The dough will be sticky. Place the dough in a deep ceramic dish and cover with plastic or a kitchen towel.

Bulk Fermentation

Let the dough sit at 25-27°C/77-80°F for about 30 minutes. Perform 3 sets of stretch-and-folds, every 30 minutes. Slide both wet hands under the dough in the center. Slowly lift the dough up until it releases from the bowl. Lower your hands to fold the dough under itself. Turn the bowl by 180° and do the same on the other side. Turn the bowl by 90° and repeat the process with the remaining sides.

During the 3rd hour, you can see how the dough starts to get billowy, soft, and aerated with gas. You should turn the dough more gently now to avoid pressing gas out of it. By the end of the 3rd hour, the dough will feel more aerated and soft. After 3-4 hours of fermentation, leave the dough untouched for the rest of the time.

Shaping

Transfer the dough to an unfloured work surface. Lightly dust the dough with flour and turn it over. Fold the the dough over on itself so that the flour on the surface of the dough is sealed to the outside of the loaf. Work the dough into a round shape. Let the dough rest for 20-30 minutes. Cover with a kitchen towel. During this resting period, the dough will relax. If your dough spreads too much, it did not develop enough tension during the bulk fermentation. You can shape the round a 2nd time to correct this.

Lightly flour the top of the dough. Slide the bench scraper under the dough to lift it off the work surface and make sure to maintain the round shape. Flip the dough over so the floured side is now on the work surface. Stretch the dough closest to you and fold it up to the center of the loaf.

Next stretch the dough horizontally to the right and fold this 3rd over the center. Stretch the dough to your left and fold this 3rd over the previous fold. Stretch out the the dough farthest from you and fold this to the center.

Grab the dough closest to you and wrap it up and over, while rolling it away from you. Cup your hands around the dough ball and pull it toward you, rounding it against the work surface to tighten the tension. Let the shaped loaf rest for 1 minute. Add a 50/50 mixture of rice flour and whole wheat flour to a small bowl. Dust your banneton with the flour mixture.

Proofing

Lift the loaf from the work surface and place it in the banneton with the smooth side facing down and the seam facing up. For the final rise you have 2 options:

Baking

Place a dutch oven with lid inside your oven and preheat it to 260°C/500°F. Dust the top of the loaf with flour and carefully flip it from the banneton onto parchment. Score the loaf as desired, so it can fully develop in the oven.

When your oven reaches 260°C/500°F, carefully remove the dutch oven and place the loaf with the parchment in the dutch oven, then cover with the lid. Return to the oven and reduce the temperature to 230°C/450°F. Bake for 20 minutes. Remove the lid. Continue baking until the crust has a deep caramel color, for about 20-25 minutes. It is done when the core temperature reaches 95°C/200°F. Remove from the oven and carefully lift the bread out of the dutch oven. Let the bread cool on a wire rack.

Storing and Freezing Instructions

Storage: Keep your bread at room temperature for 3-5 days. Paper bags or kitchen towels are perfect to protect bread from drying out too much. Do not store bread in the fridge, because then it will get stale faster compared to keeping it at room temperature.

Freezing Instructions: Let the bread cool completely and either freeze the whole loaf or slices of bread in a zipper bag for up to 3 months.

My Summary for Whole Wheat Sourdough Discard Bread

Difficulty: Intermediate.
Taste & Texture: I love this whole wheat sourdough bread, because it has a nice crust with a slightly chewy crumb and holes that are spread out nicely. The bread has a light sour taste, but not too strong. It is fantastic in terms of taste and texture.
Time: Autolyse takes about 30 minutes, bulk fermentation took me 5 ½ hours (it depends on the room temperature, in my kitchen it was about 26°C/79°F). Shaping process is done in about 45 minutes. For the final proofing, I placed the loaf in the fridge overnight (faster option: 2-4 hours at room temperature). Baking takes another 40-45 minutes.

More DISCARD Recipes

Whole Wheat Sourdough Discard Bread

Rating: 5.0/5
( 3 voted )
Serves: 1 Prep Time: Cooking Time: Nutrition facts: 200 calories 20 grams fat

Ingredients

  • 300g T55 flour (bread flour), 60%
  • 200g whole wheat flour, 40%
  • 375g water, divided, 75%
  • 100g discard starter, 20%
  • 12g salt, 2,4%

Instructions

Autolyse

  1. Pour 350g of cold water into a large mixing bowl, add the discard starter and mix a little with a silicone spatula.
  2. Add T55 flour and whole wheat flour and mix with a silicone spatula first and then with your hands until no bits of dry flour are left. 
  3. Let the mixture sit for 25-30 minutes. 
  4. Add the salt and the rest of the water to the bowl and knead for 3-4 minutes. The dough will be sticky. 

Bulk Fermentation

  1. Place the dough in a deep ceramic dish and cover with plastic or a kitchen towel. Let the dough sit at 25-27°C/77-80°F for about 30 minutes.
  2. Perform 3 sets of stretch-and-folds, every 30 minutes. Slide both wet hands under the dough in the center. Slowly lift the dough up until it releases from the bowl. Lower your hands to fold the dough under itself. Turn the bowl by 180° and do the same on the other side. Turn the bowl by 90° and repeat the process with the remaining sides (folding all 4 sides).
  3. During the 3rd hour, you can see how the dough starts to get billowy, soft, and aerated with gas. You should turn the dough more gently now to avoid pressing gas out of it. By the end of the 3rd hour, the dough will feel more aerated and soft.
  4. After 3-4 hours of fermentation, leave the dough untouched for the rest of the time. Total fermentation time in my case was 5 ½  hours at 26°C/79°F.

Shaping

  1. Use a silicone spatula to transfer the dough from the ceramic pan to an unfloured work surface. Lightly dust the dough with flour and turn it over with a bench scraper so now the floured side lies on the work surface. Try not to use too much flour at this point. 
  2. Fold the the dough over on itself so that the flour on the surface of the dough is sealed to the outside of the loaf. The outside of the dough will become the crust, so dust your hands with more flour to prevent sticking. 
  3. Work the dough into a round shape using your hand and the bench scraper. The dough should have a tight, smooth outer surface by the end of shaping. The goal is to build up a strong tension with as few movements as possible. If the surface cracks, you've developed the tension too far. Don't worry, just stop shaping and let the dough relax.
  4. Let the dough rest on the work surface for 20-30 minutes after this initial shaping. Cover with a kitchen towel. This is called the bench rest. During this resting period, the dough will relax. If your dough spreads too much, it did not develop enough tension during the bulk fermentation. You can shape the round a 2nd time to correct this.
  5. Lightly flour the top of the dough. Slide the bench scraper under the dough to lift it off the work surface and make sure to maintain the round shape. Flip the dough over so the floured side is now on the work surface. The former bottom side is now facing up. 
  6. Stretch the dough closest to you and fold it up to the center of the loaf. Stretch the dough horizontally to the right and fold this 3rd over the center. Stretch the dough to your left and fold this 3rd over the previous fold. Stretch out the the dough farthest from you and fold this to the center. 
  7. Grab the dough closest to you, stretch it down a little and wrap it up and over, while rolling it away from you so that the smooth underside of the loaf is now the top and all the seams are on the bottom. 
  8. Cup your hands around the dough ball and pull it toward you, rounding it against the work surface to tighten the tension. Let the shaped loaf rest for 1 minute.

Proofing

  1. Add a 50/50 mixture of rice flour and whole wheat flour to a small bowl. 
  2. Dust your banneton with the flour mixture. This will prevent the dough from sticking during the final rise. 
  3. Use your bench scraper to lift the loaf from the work surface and place it in the banneton with the smooth side facing down and the seam facing up. 
  4. For the final rise you have 2 options:
    • Bake the same day: Let the dough rise at room temperature (25-27°C/77-80°F) for about 2-4 hours. After 2 hours the loaf will have a mild flavor. 
    • Bake the next day: Delay the process by placing the dough in the fridge for up to 12 hours. The cool environment slows down the fermentation, but does not stop it. The dough will develop a more complex and slightly sour taste after 8-12 hours.

Baking

  1. Place a dutch oven with lid inside your oven and preheat it to 260°C/500°F about 30 minutes before baking. 
  2. If you kept the loaf in the fridge, take it out now. Dust the top of the loaf with flour and carefully flip it from the banneton onto parchment paper.
  3. Score the loaf as desired, so it can fully develop in the oven. The angle, number and pattern of the scoring will affect how the loaf rises in the oven and will determine the final appearance of the bread.
  4. When your oven reaches 260°C/500°F, carefully remove the dutch oven. Be careful because the dutch oven is very hot. 
  5. Place the loaf with the parchment in the dutch oven and cover with the lid.
  6. Return the dutch oven to the oven and reduce the temperature to 230°C/450°F. 
  7. Bake the loaf on the lower rack for 20 minutes.
  8. Remove the lid. A cloud of steam will be released and the color of the crust will be pale and shiny. This is a sign of a well steamed bread. 
  9. Continue baking until the crust has a deep caramel color, for about 20-25 minutes. It is done when the core temperature reaches 95°C/200°F. If you prefer a crackling crust which will stay crisp, continue baking until the loaf has a golden brown color. 
  10. Remove from the oven and carefully lift the bread out of the dutch oven.
  11. Let the bread cool on a wire rack. It should be light to the touch with a hollow sound when tapped on the bottom.

Notes

Prep Time: 19 hours, including 12 hours of proofing in the fridge.

Did You Make This Recipe?
Tag @nobizlikedoughbiz on Instagram and hashtag #nobizlikedoughbiz
Exit mobile version